sirrus barmixer - odd fittings

[studips]

hi folks,
refitting my bathroom with a nice shiny barmixer shower which i picked up for a ridiculously low price on ebay.

what a result i thought....... no comeback from the supplier, but for that money who cares.

the problem i'd like to put to you is that the cranked connectors supplied with the mixer which are meant to come off my 15mm supply pipes and then connect to the bar's inputs, are not 15mm - they seem to be 14mm - they take a 15mm compression nut and olive - but not the 15mm copper.

this is giving me a headache, so anyone got any advice on where to go next?

mickey taking and abuse is acceptable at this stage.

 

[TicklyT]

You could put 1/2" wallplate elbows or tap connectors on the fittings.

 

[leakydave]

Or better still, get a bar shower fixing kit...

http://www.screwfix.com

item number 93675

 

[studips]

ah thanks guys,

couple of good solutions there. much appreciated.

 

[kevplumb]

15 x 1/2"" fI connector