Sponsored Links
D
Deleted member 174758
Look for an ogee skirting. How much do you need, though? If it's only a little you may be able to pinch some from elsewhere, say a cupboard, use that and then replace thecstuff in the cupboard it with a near match. It will be less noticeable in that position
Last edited by a moderator:
As above "JobAndKnock" it is an "old" probably Imperial ogee
Yes you can still get ogee moldings but? they will probably be Metric equivalent
There are two bits to this skirting that is the molded top [ogee] and the flat vertical piece, there will be a timber sub frame supporting all
Ken.
Yes you can still get ogee moldings but? they will probably be Metric equivalent
There are two bits to this skirting that is the molded top [ogee] and the flat vertical piece, there will be a timber sub frame supporting all
Ken.
Sponsored Links
If you can trace around it, you might find some have the top bit cut off which you can see, of you search for ogee skirting some places come up some in MDF some in pine but its investigating which is the one for you.
A small joinery with a spindle moulder might or might not be able to do it in sections.
A small joinery with a spindle moulder might or might not be able to do it in sections.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
