Hi guys, I m desperate and very frustrated with this.
Moved in to new house recently, every room has aerial sockets and master and bedroom2 have extra sockets on high up the wall I assume these 2 were put by the previous owner for wall mounting TVs. In the lounge where sky + HD, and my sat receiver are, here on the wall 2 aerial sockets and sat socket.
In the loft amplifier (signal booster) which has 4 outputs going to the rooms I guess. In put is loft aerial. Freeview works fine in master and bed 2 via 2 additional aerial sockets.
Right my plan was, run a cable via outside from sky HD RF 2 out to the loft and unplug the existing aerial input from the amplifier plug the sky hd cable and thought was get sky signals in the rooms unfortunately magic eye don work in the rooms.
I tried magic eye direct with the cable and also via new amplifier which is compatible with sky HD, magic eye works fine, so problem is I think between the amplifier and wall aerial sockets. I checked to see if the sockets isolated but not sure the answer but behind the one socket that I opened there are 2 coaxial cables connected and I also undo them and connected to magic eye separately still nothing.
Rf2 out power is on signal after the amplifier but nothing in the rooms. There are so many cables in the loft I am so confused. Buy I am trying every cable special the ones marked with each rooms. Please I really need your help and look forward to your advises
Moved in to new house recently, every room has aerial sockets and master and bedroom2 have extra sockets on high up the wall I assume these 2 were put by the previous owner for wall mounting TVs. In the lounge where sky + HD, and my sat receiver are, here on the wall 2 aerial sockets and sat socket.
In the loft amplifier (signal booster) which has 4 outputs going to the rooms I guess. In put is loft aerial. Freeview works fine in master and bed 2 via 2 additional aerial sockets.
Right my plan was, run a cable via outside from sky HD RF 2 out to the loft and unplug the existing aerial input from the amplifier plug the sky hd cable and thought was get sky signals in the rooms unfortunately magic eye don work in the rooms.
I tried magic eye direct with the cable and also via new amplifier which is compatible with sky HD, magic eye works fine, so problem is I think between the amplifier and wall aerial sockets. I checked to see if the sockets isolated but not sure the answer but behind the one socket that I opened there are 2 coaxial cables connected and I also undo them and connected to magic eye separately still nothing.
Rf2 out power is on signal after the amplifier but nothing in the rooms. There are so many cables in the loft I am so confused. Buy I am trying every cable special the ones marked with each rooms. Please I really need your help and look forward to your advises