Hi folks
just fitted some lights in a loft, 3 fittings on one switch (2 way), one fitting on one way, the 3 fittings on the 2 way circuit have a very slight glow when switched off, the 3 core for the 2 way only runs along side another lighting cable for about 600mm so I can't see induced current being an issue, tested the switches to make sure the contact was breaking completely and they were fine, any ideas?
the LEDs are the GU10 type fittings, there are 7 on the circuit in question, 3 on two of the fittings, 1 on the other
edit: sorry folks, just read some other answers to this on earlier posts, sorted now!
just fitted some lights in a loft, 3 fittings on one switch (2 way), one fitting on one way, the 3 fittings on the 2 way circuit have a very slight glow when switched off, the 3 core for the 2 way only runs along side another lighting cable for about 600mm so I can't see induced current being an issue, tested the switches to make sure the contact was breaking completely and they were fine, any ideas?
the LEDs are the GU10 type fittings, there are 7 on the circuit in question, 3 on two of the fittings, 1 on the other
edit: sorry folks, just read some other answers to this on earlier posts, sorted now!