sloped concrete floor > 3inches from highpoint to lowpoin
- Thread starter mitch40
- Start date
Sponsored Links
the only way i level concrete floors is using sand & cement screed. the trouble is i don't like to go much above 1".
so i would try to level out to within 1" with concrete then top with screed.
i'm not sure what u would bed the flooring on but if they are tiles or flags then the screed would do both jobs. otherwise u will need to limit the ht of the concrete/screed to give the required finished floor level.
so i would try to level out to within 1" with concrete then top with screed.
i'm not sure what u would bed the flooring on but if they are tiles or flags then the screed would do both jobs. otherwise u will need to limit the ht of the concrete/screed to give the required finished floor level.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
Similar threads
