I need a couple of small lockable ball jointed mountings to mount two CCTV cameras close to a wall. They will be looking along the wall to record any vehicles that hit the wall or the overhanging thatched roof. as it is a listed building the cameras have to be fitted behind an existing house name plate which is 10 inches in diameter.
is a rough idea of what is needed
The adjustment range needs to be 15 degrees horizontally and vertically to aim the camera before it is locked off by the lock screw.
The red shaft would preferably be female with an M3 or M4 thread.
The cameras are "eye ball" which is not the best shape when it comes to mounting them but they are low enough cost to be expendable.
is a rough idea of what is needed
The adjustment range needs to be 15 degrees horizontally and vertically to aim the camera before it is locked off by the lock screw.
The red shaft would preferably be female with an M3 or M4 thread.
The cameras are "eye ball" which is not the best shape when it comes to mounting them but they are low enough cost to be expendable.