In the process of installing my kitchen I took a spur from a socket then ran this through a FCU to the under cabinet lighting. After installing a corner unit I would like to put lights (that automatically turn on when door is opened) inside this cupboard as it is very dark inside. I have some that terminate in a plug. Now that the units and worktop are in place I can't run a spur from another circuit to a socket below or in the cupboard.
The FCU is accessible. Can I connect a 2.5mm cable to the supply side of the FCU and run this to a socket?
The FCU is accessible. Can I connect a 2.5mm cable to the supply side of the FCU and run this to a socket?