spare part for WC flush mechanism (Ed.)

[Bender000]

Hi
The pic attached is from my toilet flushing mechanism.

The green circle shows the bits that have broken. The rod in the right of the part labelled 1 goes in those holes.

I am a newbie so don't know what I am searching for, but I need a replacement for the part labelled 2.

My toilet doesn't have any branding etc on it either.

Many thanks.

 

[freddiemercurystwin]

Normally you replace the hole mechanism with a compatible one, you wont be able to replace just that little bit.

 

[Bender000]

Normally you replace the hole mechanism with a compatible one, you wont be able to replace just that little bit.

Actually it does screw off at the join as indicated by the red arrow in the image below:

 

[Burnerman]

Check out toiletspares.co.uk
Flush valves or push buttons, maybe?
John

 

[CountryFan]

Where was the toilet purchased from? As above, Toiletspares.co.uk are a great help. Failing that, as suggested, replaced the whole flush valve.

 

[freddiemercurystwin]

Actually it does screw off at the join as indicated by the red arrow in the image below:

Sure but they won't sell tiny spare parts even if the same type of flush is still available.

 

[Bender000]

Can't remember where toilet was bought. It was some mate of my dad's who installed it many moons ago (15 years or so I'd guess).

I'll look on Toiletspares.co.uk, but also not averse to buying a whole new mechanism if needed. But hoping I don't need a whole brand new toilet!

Thanks all

 

[CountryFan]

I'll look on Toiletspares.co.uk, but also not averse to buying a whole new mechanism if needed.

Good idea.

But hoping I don't need a whole brand new toilet!

You shouldn’t do for a flush valve.