Hi all,
When turning the thermostatic valve back on it was a bit stiff and loosened the nut so I tightened it back up but now water is seeping from arround the valve spindle. Took the thermostatic valve off expecting a brass nut to tighten but it's plastic, the middle bit turns and is numbered 1-6. What do I do? If I turn it slightly either way it makes the leak worse.
Thanks
EDIT
Forgot to mention I cleaned the spindle up and worked it up and down but it's not helped.
When turning the thermostatic valve back on it was a bit stiff and loosened the nut so I tightened it back up but now water is seeping from arround the valve spindle. Took the thermostatic valve off expecting a brass nut to tighten but it's plastic, the middle bit turns and is numbered 1-6. What do I do? If I turn it slightly either way it makes the leak worse.
Thanks
EDIT
Forgot to mention I cleaned the spindle up and worked it up and down but it's not helped.
