Ive got about 100x8ft interior blockwork wall of a workshop I want to paint to make the place look tidier and reflect the light better. Im thinking at semi-gloss emulsion which is what we used for the same task in my parents garage but you couldnt get a good finish with a longhair roller, it was very slow indeed to work it into the concrete blocks with a 6inch brush for be before embarking on 800sqft I thought I would ask about spraying it.
I also have a load of panelled fences to replace and or paint and wouldnt mind being able to spray them also
Looking at a few cheap/secondhand sprayers ebay, as well as the seriously cheap 'fence sprayers' found in BnQ.
Thoughts? Neather job has to be super awesomely smart, but fairly good, masking is not too much of an issue as there big areas, and a lot of the fence panels could be sprayed before they are in the posts.
I have a smallish belt drive compressor (circa 4hp) and in the workshop there is assess to a very much bigger 3ph one but I couldnt use that for the fences.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200877776857
http://www.ebay.co.uk/itm/hvlp-spray-gun-/221176736404
Daniel
I also have a load of panelled fences to replace and or paint and wouldnt mind being able to spray them also
Looking at a few cheap/secondhand sprayers ebay, as well as the seriously cheap 'fence sprayers' found in BnQ.
Thoughts? Neather job has to be super awesomely smart, but fairly good, masking is not too much of an issue as there big areas, and a lot of the fence panels could be sprayed before they are in the posts.
I have a smallish belt drive compressor (circa 4hp) and in the workshop there is assess to a very much bigger 3ph one but I couldnt use that for the fences.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200877776857
http://www.ebay.co.uk/itm/hvlp-spray-gun-/221176736404
Daniel
Links in this post may contain affiliate links for which DIYnot may be compensated.