Hi,
We have some mdf speaker enclosures , about 16 x 12 x 10 "covered with oil based gloss paint and mdf sealer/primer.
Looking to veneer them so need to remove all the paint as advised the veneer glue will fail if used direct onto the paint.
Seems we could use sanding, at lot !, a heat gun or stripper / caustic soda but not sure if these would damage the surface of the mdf or leave too much residue.
Any advice please .
We have some mdf speaker enclosures , about 16 x 12 x 10 "covered with oil based gloss paint and mdf sealer/primer.
Looking to veneer them so need to remove all the paint as advised the veneer glue will fail if used direct onto the paint.
Seems we could use sanding, at lot !, a heat gun or stripper / caustic soda but not sure if these would damage the surface of the mdf or leave too much residue.
Any advice please .