- Joined
- 8 Sep 2013
- Messages
- 1
- Reaction score
- 0
- Country
Hi,
I've been having a few problems with the above actuator and right in the middle of trying to fix it found that one of the motor wires has broken from the microswitch. It was so badly connected I can't see where it has broken away from; only joined by about 5 strands of wire.
Can anyone tell me which connection it should be soldered back onto please?
If you need any more info please let me know.
TIA
I've been having a few problems with the above actuator and right in the middle of trying to fix it found that one of the motor wires has broken from the microswitch. It was so badly connected I can't see where it has broken away from; only joined by about 5 strands of wire.
Can anyone tell me which connection it should be soldered back onto please?
If you need any more info please let me know.
TIA
