Sunvic sd 2752 3 way valve

[Groovejet]

Im looking 4 a replacement valve to fit directly into the Sunvic mechanical prog. as its the type with a molex plug , with 4 wires.
Can i interchange with a different valve?? or do i stick with same type?
What i mean is can i use another model and connect the wires into a molex plug then fit that to prog?
To get the heating on ive by-passed the motorised valve, but want to get one asap.

 

[Groovejet]

Updating above post!
Bought valve from Toolstation. Its the SD model with spring return and does the job fine, although it doesnt come with the molex plug to fit straight into the programmer, but as this was £60 cheaper i hard wired the 4 wires into connector blocks then attached these to the prog. via the molex plug.
Part cen- £100 inc vat
Toolstation approx £40 inc vat, the only difference is this one hasnt got a molex plug, What a rip off!!!

 

[45yearsagasman]

Pays to do a bit of research!!!