texecom internal sounder

[jane888]

hi all, new to this forum but brought a texecom veritas panal. i have brought an internal sounder as well, how do i wire this into the panel? the sounder has a black a red hardwired wire on it - how is this connected up to the wire 6 core cable?

thanks

the sounder is this one...
http://www.alertelectrical.com/prod/1618/quadruple-piezo-sound-bomb-or-internal-sounder

 

[Denford1]

The sounder just connects to the bell terminals at the panel , the red wire goes to A ( 12v perm) and the black wire goes to B ( sw-ve)

 

[jane888]

the two wires coming off the sounder - do they just get taped to the 6 core cable or shall i use a connecting block.
also the sounder i have brought has no wall mounting - should this be put inside another more decorative box? if so where can i obtain one of these from?

thanks

 

[Denford1]

Usually the front comes off to reveal a back plate , this then is screwed to the wall , then the front attached.Yes you can use a terminal block if you wish.