- Joined
- 7 Feb 2017
- Messages
- 13
- Reaction score
- 0
- Country

At the end of last year I was unfortunate to have a house fire in a part renovated house. Due to the fire many of the alarm wires were damaged. I can't replace them due to sensor locations.
I have been recommended the above system.
I need panel / remote keypad
5 sensors
1 dual tech
2 bell boxes
1 door contact
I have watched a couple of you tube videos and it appears a reasonable diy job.
I am a time served instrument technician but I have not been in this field for 25 years.
Can anyone please advise. Am I taking on something I shouldn't as I get the impression Texecom are not particularly helpful unless you are a registered engineer.
Thank you in anticipation
Rob
I have been recommended the above system.
I need panel / remote keypad
5 sensors
1 dual tech
2 bell boxes
1 door contact
I have watched a couple of you tube videos and it appears a reasonable diy job.
I am a time served instrument technician but I have not been in this field for 25 years.
Can anyone please advise. Am I taking on something I shouldn't as I get the impression Texecom are not particularly helpful unless you are a registered engineer.
Thank you in anticipation
Rob