• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

Thermostat

  • Thread starter Thread starter oompah
  • Start date Start date
O

oompah

I've replaced my hot water tank thermostat the old one is/was a switchmaster the new one is a sunvic the wiring is 3 core and earth but the new one requires no earth Q1 is what to do with the earth wire Q2 is do i wire it back up the same ie 1 red 2 yellow 3 blue.Thanks in advance.
 
As wire colours are not standard in heating systems, I will have to explain by what they are connect to.

The wire to programmer HW ON goes to Sunvic 3

The wire to programmer HW OFF goes to Sunvic 2 (grey valve wire also connected here)

The wire to valve orange goes to Sunvic 1 (boiler switched live also connects here)

The earth wire is not needed and should be made safe.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top