The pin was stuck in on the TRV so I used a pair of pliers to pull it back.. However, I pulled a litle too hard and pulled the pin out completely. DOH!
The pin will go back in far enough to plug the leak - but will not go fully back in.
I tried to knock it back in with a hammer but only resulted in bending the pin slightly. DOH!!
Can I get the pin back in or do I need a new TRV?
The pin will go back in far enough to plug the leak - but will not go fully back in.
I tried to knock it back in with a hammer but only resulted in bending the pin slightly. DOH!!
Can I get the pin back in or do I need a new TRV?
