Have removed the tiles that were coming from wall around bath, and the plaster beneath is damp.
Removing bath tomorrow and installing new one. Was hoping to stick waterproof tile backer boards to the walls with adhesive then drill into wall when cured.
Will I be ok setting the board to this with S1 adhesive even if it's still a little damp?
There's breezeblock beneath the plaster.
Removing bath tomorrow and installing new one. Was hoping to stick waterproof tile backer boards to the walls with adhesive then drill into wall when cured.
Will I be ok setting the board to this with S1 adhesive even if it's still a little damp?
There's breezeblock beneath the plaster.
