Tilers - brick slips, what adhesive?
- Thread starter ^woody^
- Start date
Best choice might be, Ardex EG 8 PLUS epoxy. It will work as an external adhesive & a grout. Its so much easier to work with than previous epoxies but its expensive.
Otherwise any cementitious bagged adhesive powders will, nowadays, most likely work for internal & external - use BAL, Mapei etc. top brands only.
Use the flat, back of the trowel to skim the board surface then comb the board with a 6mm notched trowel.
Then comb the back of the tile.
It fills in and gives wriggle room.
Otherwise any cementitious bagged adhesive powders will, nowadays, most likely work for internal & external - use BAL, Mapei etc. top brands only.
Use the flat, back of the trowel to skim the board surface then comb the board with a 6mm notched trowel.
Then comb the back of the tile.
It fills in and gives wriggle room.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
