Tilting fillets - When to use

vards01 · 2 Oct 2023

Hi all,

Looking for some advice on whether a tilting fillet would be required on a 8/12 pitch using single camber acme tiled roof, I am replacing all the rafters and was curious whether a tilting fillet should be used? Cant really find much info online, but could easily install one at this stage.

Thanks in advance.

^woody^ · 2 Oct 2023

It's one for the roofing section!

The eaves tray needs something to rest on and angle it to the top of fascia, so that may need fillets on each rafter or nogings between them.

vards01 · 2 Oct 2023

I was planning on using 5U eaves protector as I would prefer something continuous. Also using over fascia vent, so a continuous fillet wouldn't be suitable.

Something like this:

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

Tilting fillets - When to use

vards01

^woody^

vards01

DIYnot Local

Similar threads