Can anyone help? Upon flushing the pan the syphonic action is not very energetic, leading to not all the waste getting carried away in one flush. Any ideas? Could there be a blockage within the pan itself. It is a 8 litre low level cistern using a part 3 ball valve.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
toilet pan flush slow
- Thread starter vijay
- Start date
Check to see if the cistern empties when flushing if not sounds like your diaphragm split or damaged (the diaphragm is at the bottom of the plunger which push the water out when you flush the cistern).
Either renew the diaphragm or replace the flushing unit.
I made one temporary out of DPC and forgotton all about , still going strong !
Either renew the diaphragm or replace the flushing unit.
I made one temporary out of DPC and forgotton all about , still going strong !
thanks for that. The cistern does empty in one turn of the lever, however its more a case of the flushing water isn't very powerful. any ideas?
thanks.
thanks.
Syphon in the pan.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
