Hi Guys, I've had a new sink in the kitchen installed recently by a plumber, turned water off, fitted and back on again, everything working as it should. I've got a minor problem I'd appreciate advice on as it has only occurred since the sink fitting.
The monobloc mixer turns off ok at the taps, but 5mins later a heavy drip comes through the tap to the sink. It's like the tap is getting cleared of its contents, lasts a couple of seconds, then doesn't happen again until the next time the sink is fully used.
What's wierd ( to me) is that the electric shower is doing the same thing. Previously no problem, now after it is turned off 5mins later a heavy drip comes through it as above, then having cleared doesn't do it again until the next time the shower is fullly used.
The stopcock has been put back to its original position so I don't want to muck about with it unless I'm advised from this forum.
The monobloc mixer turns off ok at the taps, but 5mins later a heavy drip comes through the tap to the sink. It's like the tap is getting cleared of its contents, lasts a couple of seconds, then doesn't happen again until the next time the sink is fully used.
What's wierd ( to me) is that the electric shower is doing the same thing. Previously no problem, now after it is turned off 5mins later a heavy drip comes through it as above, then having cleared doesn't do it again until the next time the shower is fullly used.
The stopcock has been put back to its original position so I don't want to muck about with it unless I'm advised from this forum.