Tool/spanner for compression fitting in really tight space?

[User1234567890]

Does anyone know of a spanner/tool for getting in really tight spaces where a compression fitting is in between a wall and another pipe? There only looks to be about 6mm ish, either side, so whatever it is, needs to have really narrow, pointy jaws. I have tried a 24mm split ring spanner, but it is way too thick.

Does such a thing exist, and if so, what is it called? Thanks.

 

[aveatry]

I made my own out of an old spanner cut it down to make it thinner in that area.

 

[RrogerD]

What about a basin wrench?

https://www.screwfix.com/p/forge-steel-basin-wrench-1-2-3-4-/106yc

 

[avonmouth]

I made my own out of an old spanner cut it down to make it thinner in that area.

That's what i done years ago.I have spanners that fit most nuts i will come across in plumbing.

 

[User1234567890]

Thanks for the suggestions. I have ground down an old spanner and that did the trick. Had to bash off some plaster as well, but it's being boarded over, so it's not a problem. Cheers

 

[aveatry]

Thanks for the suggestions. I have ground down an old spanner and that did the trick. Had to bash off some plaster as well, but it's being boarded over, so it's not a problem. Cheers

Great and now you have a ready made spanner for the next time.