Towel rail fitting to microbore

[Cracker]

Hi,
I'm trying to replace a radiator in my bathroom with a towel rail. The towel rail threads are 3/4" (not usual 1/2") and I have a 10mm microbore pipe feeding the existing valve. I cannot seem to find a towel rail valve (straight) the has a 10mm feed and 3/4" thread for towel rail. Is it possible to buy a 15mm version and get some kind of adapter?

Thanks for any advice.

 

[chr15]

You can buy a 15mm -10mm reducer and fit it in the valve in place of the olive.

 

[Cracker]

Thx for the reply. Just to fully clarify I simply need to replace the olive in the 15mm valve with the CF reducer and then tighten with the same valve nut to the 10mm microbore.

 

[bster]

you need a 3/4 - 1/2" bush
http://www.trueshopping.co.uk/product.php?pid=186&cid=77&rfid=28&pn=Brass+Bush+3+4&