TRV Identification

[sparkypenguin]

Hi all,

One of my TRV heads has broken and I only want to replace the head and not the valve.
After a quick google I think I will need to use the exact same head to ensure the calibration is correct.
It is a Boss with no part number on it and it is quite old so I am hoping that someone can identify it for me?
I have attached a photo.
Any help would be much appreciated.

Regards,
Mark.

 

[ianmcd]

It is a BOSS Supreme plus, not sure if you will be able to buy the actuator only you might have to buy the whole valve , but other universal actuators will fit

 

[Deleted member 267285]

Would have thought something like this would fit. They’re also similar in appearance to Pegler bulldog/terrier valves, but like Ian said, standard heads should fit too.

 

[ianmcd]

Would have thought something like this would fit. They’re also similar in appearance to Pegler bulldog/terrier valves, but like Ian said, standard heads should fit too.

your link is the exact same valve as he has, but just wants to change the sensor, not sure if you can buy a sensor only for that one , maybe try ebay

 

[Deleted member 267285]

your link is the exact same valve as he has, but just wants to change the sensor, not sure if you can buy a sensor only for that one , maybe try ebay

Tbh mate, I’ve looked at eBay and they’re quit expensive for just the head They have a 10/8mm version slightly cheaper for just the head

 

[sparkypenguin]

Hi all and thanks for your help.
I'll prob just buy the full set and then just swap the head bit then at least I don.t have to mess about with any plumbing

 

[SandyLyon]

The BOSS brand is exclusive to BSS / PTS merchants