Does anyone know where I can find a tubular (mortice style) bolt latch with a 44mm backset, to take a 5mm spindle?
I have been searching all over without success. I've found latches for door handles in this size, but they'd be no good for a bolt would they, as they are sprung to hold the latch out.
This is what I am looking for but I need the shorter backset:
http://www.diy.com/diy/jsp/bq/nav.j...ndid=9277051&ecamp=trf-005&CAWELAID=266934556
(As you can see from the comment on that page someone else has had the same problem I have!)
Any help much appreciated...
I have been searching all over without success. I've found latches for door handles in this size, but they'd be no good for a bolt would they, as they are sprung to hold the latch out.
This is what I am looking for but I need the shorter backset:
http://www.diy.com/diy/jsp/bq/nav.j...ndid=9277051&ecamp=trf-005&CAWELAID=266934556
(As you can see from the comment on that page someone else has had the same problem I have!)
Any help much appreciated...