I have a landing light controlled by 3 switches, 1 in the hall and 2 on the landing. I wish to remove one on the landing which is wired as follows.
yellow=common, 2 red=L1, 1 black/1blue=L2
As the wiring is surface mounted (only one that is) up to the roof space, is it safe just to end all these connections with joining blocks & hide in the roof space?
Thanks in anticipation.
yellow=common, 2 red=L1, 1 black/1blue=L2
As the wiring is surface mounted (only one that is) up to the roof space, is it safe just to end all these connections with joining blocks & hide in the roof space?
Thanks in anticipation.