- Joined
- 11 Jan 2004
- Messages
- 170
- Reaction score
- 4
- Country
Hi, I am wanting to set up a system where waste water from some benchtop machines is collected in waste containers under the bench.I will have two containers and when one is full I want to divert the waste to the other using some sort of diverter tap or valve so that I can then empty the full one at some stage. The water may have to be diverted while pumps are going and so I cannot simply change the waste hose from one container to the other.(Hope this makes sense!) Does anyone know of such a valve or tap to carry this out, I have had a pretty good look on the web, no luck. Any help would be really appreciated. Thanks Jim