Hi, the silicone on my undermount kitchen sink is 3 years old and is black from mould. No leaks but wondering if it should be replaced. I've tried cleaning it with bleach & with vinegar but nothing seems to shift it.
It's a stainless steel sink & wondering if the whole sink would need to come out, silicone taken off & then resiliconed before refitting (on which case I'd get a plumber in) or whether I can scrape it out & then reseal without taking it out.
It doesn't seem to have any clips on the sink holding it in place so I'm guessing it's adhesive that's holding it in.
Looks an awkward gap for getting a silicone nozzle into so any tips would be gratefully received.
I've attached some photos to show the problem.
Thanks.
It's a stainless steel sink & wondering if the whole sink would need to come out, silicone taken off & then resiliconed before refitting (on which case I'd get a plumber in) or whether I can scrape it out & then reseal without taking it out.
It doesn't seem to have any clips on the sink holding it in place so I'm guessing it's adhesive that's holding it in.
Looks an awkward gap for getting a silicone nozzle into so any tips would be gratefully received.
I've attached some photos to show the problem.
Thanks.