Vailant Eco Tech 624

Joined
26 Aug 2007
Messages
159
Reaction score
1
Location
Lancashire
Country
United Kingdom
HI

Still having problems!

Pressure drops over night and often prevents CH coming on.

I top up via the filler pipe so the pressure needle reads half way.

Heating comes on and the pressure rises into the red. I have tied a bag to the overflow and water collects into it.

Heating switches off at the designated time at night and the pressure drops again.

I have checked all the pipes with tissue paper and been under the floor. Whilst there is green corrosion around one fitting there is no moisture evidence / drips and I have looked at it whilst the CH is on.

I have one pipe inder a concrete floor (poor builder!!!!!) and cant check that for a leak, but there is no evidence of a leak - laminate floor is not springy etc.

Are there any other checks I can do? Advice you can give me to pin point the fault?

Thanks
 
Heating comes on and the pressure rises into the red. I have tied a bag to the overflow and water collects into it.

look up expansion vessel in F&Q
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top