Vaillant problem

Joined
7 Jun 2014
Messages
1
Reaction score
0
Location
Berkshire
Country
United Kingdom
Hi can anyone help, a year ago we had no hot water from our vaillant Turbomax combi boiler but heating was OK, we were fitted with a new heat exchanger and all was well, since then a new diverter valve and expansion vessel have also been renewed , but now we have the same problem of no hot water but heating is ok , water pressure is ok and all seems to fire up plus the water temp indicates that there is hot water , hope this makes sense .
Thanks
 
Sponsored Links
When ours stopped giving hot water it was the flow sensor. Small, round plastic bit held in by a circlip. Popped the clip off cleaned out some gunk and all was well. Not sure if that quite matches your symptoms but it is easy to check, 5 min job.
 
Sponsored Links
Is there hot water coming out of the boiler. Check the pipe that is second from the left to see if it gets hot when there is a hot water demand. If it is hot coming out of the boiler but cold when it reaches your tap, you might have a faulty shower valve/ mixer tap
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top