Valiant ecotec plus 824 pressure

[Tipper]

My 824 has suddenly started indicating the system pressure on the digital indicator instead of the running temperature which it has done for the last 18 months.

I've tried resetting, turning off the power, etc, but it reverts to pressure after running thru it's start up sequence.

The boiler seems to run OK on both CH and HW and the Pressure gauge matches the digital pressure but why has it changed? Is this a control fault/card problem on the horizon?

 

[lightning]

Press the - key for 10 secs should revert back

 

[Bunnyman]

As above hold - in an it will start flashing temp then pressure hold in until it shows temp stable then let go

Untitled

• Bunnyman
• 26 Mar 2010
• 499

 

[bell824]

pesky kids pressing buttons they shouldn't eh, as above!!!!

 

[Tipper]

That did it...Thanks.