Hi
I bought my son a Vauxhall Viva (not the 1970s model ! ) for learning to drive & first car. Cracking little car but..........
There has been a knocking noise from under the front end. I use a very helpful mechanic but this fault was misdiagnosed.
He replaced the top strut mounts. Then the drop links and track rod ends. The springs were also replaced.
The noise continued and was eventually traced to the steering rack by someone else. My mechanic said to get the rack end which I did for just £19.00.
I decided to do this myself to save some money considering the incorrect parts already installed.
Tonight I successfully gained access only to discover the steering rack has play where the steering rod exists the rack. Having done some research it seems the bush is worn inside and there is no alternative but to replace the complete steering rack. The gator at the rack end did not have a clip securing the gator so moisture and dust would have been able to contaminate the seal.
Is replacing the full rack something I can do myself. I am a heating engineer. I have tools and used to taking mechanical things apart.
What is involved and can it be done off axle stands
Thank you
I bought my son a Vauxhall Viva (not the 1970s model ! ) for learning to drive & first car. Cracking little car but..........
There has been a knocking noise from under the front end. I use a very helpful mechanic but this fault was misdiagnosed.
He replaced the top strut mounts. Then the drop links and track rod ends. The springs were also replaced.
The noise continued and was eventually traced to the steering rack by someone else. My mechanic said to get the rack end which I did for just £19.00.
I decided to do this myself to save some money considering the incorrect parts already installed.
Tonight I successfully gained access only to discover the steering rack has play where the steering rod exists the rack. Having done some research it seems the bush is worn inside and there is no alternative but to replace the complete steering rack. The gator at the rack end did not have a clip securing the gator so moisture and dust would have been able to contaminate the seal.
Is replacing the full rack something I can do myself. I am a heating engineer. I have tools and used to taking mechanical things apart.
What is involved and can it be done off axle stands
Thank you
