vertical designer rads

[gg1a]

im installing vert desg rad....
1. is there a set distance from floor..mines at the moment is 6" if i add str8 trv...i have only 2" above floor, no water as yet so can alter height

2. does it matter what size of feed pipes to use , 10 or 15 mm , mines is 10mm....but thinkin of reducer[10-15mm] to fit to give me 15 mm at rad

3 the rad has no tails pipes ,do i have to buy them seperately or do they come with trv , im thinking of buying draytona valves

thanks help appreciated

 

[gas4you]

1) What ever is practical

2) 10mm should be fine. Can use a reducer to 15mm if you want but why?

3) look arond and buy whatever style/finish you want. Check on pipe connection size

 

[gg1a]

the reason 4 reducer is the trv is 15mm, but do the tails come with trv...?

 

[Nige F]

yep, the tails come with the valves -Drayton they`re good quality ones