Hi All,
After new flooring for my bathroom. I've levelled out the old floorboards and used ply sheets, I think about 5mm(ish) nailed at 150 centres with ring nails.
HOWEVER theres still a bit of variance in the levels over the total area.
Are the tiles fairly tolerant of small discrepancies?
I've never had or fitted vinyl before but thought vinyl tiles might give a bit more resistance to showing nail heads/joints etc than sheet. Is this the case or are they just smaller pieces of the vinyl sheet?
Also, do I need to prime the plywood with anything before fitting either?
Any advice appreciated.
Mike
After new flooring for my bathroom. I've levelled out the old floorboards and used ply sheets, I think about 5mm(ish) nailed at 150 centres with ring nails.
HOWEVER theres still a bit of variance in the levels over the total area.
Are the tiles fairly tolerant of small discrepancies?
I've never had or fitted vinyl before but thought vinyl tiles might give a bit more resistance to showing nail heads/joints etc than sheet. Is this the case or are they just smaller pieces of the vinyl sheet?
Also, do I need to prime the plywood with anything before fitting either?
Any advice appreciated.
Mike