1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Visonic Powermaster Trouble

Discussion in 'Alarms, CCTV & Telephones' started by Pops47, 24 Aug 2021.

  1. Pops47

    Pops47

    Joined:
    24 Aug 2021
    Messages:
    2
    Thanks Received:
    0
    Country:
    United Kingdom
    I'm new to alarms but I'm pet sitting for my son and his powermaster alarm is reading "not ready trbl". Managed to look at events and the following events all happened at the same time. Comm failure - GSM NET Fail - GPRS NET FAIL - G01 LINE FAIL. I believe it's a ADT Visonic powermaster 10. I can't set alarm. Any ideas for solutions. I don't know how to clear the problems so I can set the alarm.
     
  2. Sponsored Links
  3. secureiam

    secureiam

    Joined:
    20 Jun 2014
    Messages:
    5,354
    Thanks Received:
    667
    Location:
    Lancashire
    Country:
    United Kingdom
    phone ADT or an alarm installer?

    the sim card is out of contract
    gsm tower down
    gsm module failed. all of which will probably require the engineers code to either rest the fault or program off.

    without an engineers code, you may be able to rest with a full power cycle and then reprogram time and date.
     
  4. Pops47

    Pops47

    Joined:
    24 Aug 2021
    Messages:
    2
    Thanks Received:
    0
    Country:
    United Kingdom
    Thanks for the reply, sounds complicated, and being an electronic idiot I wouldn't have the first clue how to reset with a full power cycle. Still I'll try Google and youtube and see where I get.
    Thanks again secureiam appreciate the advice.
     
Loading...

Share This Page