Viva Skylo bottom fill valve

[Mister Banks]

Fitted a Viva Skylo bottom fill valve to our downstairs cistern and I found a piece of blue plastic in with the instructions but nowhere does it say what it is for. Any idea?

 

[oldbuffer]

Its a pressure reducer. From memory, fits inside the threaded inlet shank.
If your WC is mains water fed, then unless the pressure is very low, fit it.
If your WC is tank fed, don't fit it.

 

[denso13]

Seen similar for fitting inside the inlet, at the bottom. Depends on existing low/high pressure to the fill valve.

 

[denso13]

AKA, flow restrictor,

 

[Laurieo]

It is supposed to fit inside inlet pipe ,think they say its for a quite fill, although other makes use them as a flow restrictor.

 

[Mister Banks]

Its a pressure reducer. From memory, fits inside the threaded inlet shank.
If your WC is mains water fed, then unless the pressure is very low, fit it.
If your WC is tank fed, don't fit it.

Thanks, shame the instructions dont mention this so I know before finishing the installation . My WC is mains water fed and high pressure so is it essential to fit this?

 

[Mister Banks]

Viva have now replied to me. Apparently the little bit of blue plastic is a spare filter for use with "harsh" water, whatever that means, if required.