Wall cabinet hangers

[JohnD]

I have used the screw-adjust wall-cabinet hangers before, and like them. This sort of thing.

I am now thinking about putting up a row of wall cabs, and was wondering if instead of putting up numerous little metal strips, I can get long pieces so I can move my cabs about if I want to

I have an idea I've seen hanging strips somewhere.

 

[xerxes]

I have an idea I've seen hanging strips somewhere.

So have I, but I've yet to find any. I've used perforated galvanised strip, mounted on spacers, to achieve the same sort of thing.

A good way of hanging a run of cabinets is to use French cleats (you make your own, from timber).

 

[JohnD]

not much good at woodwork

got only basic tools

Is this galvanised strip commonly available?

 

[Jasonb]

Woodfit do both steel and alloy versions.

You will need to notch the back edge of the carcase to clear the strips or pack the bottom out.

http://www.woodfit.com/index.php?cPath=115_15&Name=Cabinet+Hanging+and+Adjustment+Brackets

Jason

 

[JohnD]

thanks, that would do the trick

I think it will be easiest to pack out the bottoms.

£25 a length though

 

[Jasonb]

Tell them you are trade and get at least 40% off

Jason

 

[JohnD]

never done that before.

don't they want some kind of proof? or can I just call myself "JohnD, Carpenter & Joiner" in my email?