wall painting
- Thread starter 69er
- Start date
- Joined
- 14 Mar 2005
- Messages
- 5,776
- Reaction score
- 30
- Country
Start at the top....cut one wall in at a time with a three inch brush...then start rolling, normally away form the source of natural light. Keep one wet edge of paint going all the time by roling either floor to ceiling in strips of about 18 inches or horizontally wall to wall.
If the rooler sleeve is brand new then make sure you wash it out first....if its a used one then dampen it....this will allow the paint to be absobed into it quicker as oppsed to it sittiing on the surface of the sleeve until it gets worked in.
If the rooler sleeve is brand new then make sure you wash it out first....if its a used one then dampen it....this will allow the paint to be absobed into it quicker as oppsed to it sittiing on the surface of the sleeve until it gets worked in.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
