Washing machine not running program after tripping RCD

[Steveb21]

Bosch Classixx Vario Perfect - WAE28166GB

The machine tripped the RCD whilst running a cycle. Since then it will not start any programs.

When pressing start the buttons light turns solid (as it should) but the machine does nothing else. At this point it should start drawing water in.

No flashing error lights/codes
Door switch has been swapped out - no change
Water inlet has been disconnected and has good water flow

Any one having guidance on which areas i should be checking next?
Pressure switch?
Inlet valve?
Drain pump?

Many thanks.
Steve

 

[Taylortwocities]

...

 

[Harry Bloomfield]

Any one having guidance on which areas i should be checking next?
Pressure switch?
Inlet valve?
Drain pump?

I would guess at a main processor board complete failure, but not easy with no fault indications showing. There is some expertise on the whitegoods forum.

 

[Taylortwocities]

I would guess at a main processor board complete failure, but not easy with no fault indications showing. There is some expertise on the whitegoods forum.

Yes, ask here. https://www.diynot.com/diy/forums/appliances/

Or you could ask mods to move the topic.