Have you measured the flow rate in litres per minute? You can do this by timing how long it takes to fill a known volume, and doing the appropriate maths. Probably the bath taps would be the easiest to do.
Water Pressure Problem
- Thread starter ukdaasfan
- Start date
Have you measured the flow rate in litres per minute? You can do this by timing how long it takes to fill a known volume, and doing the appropriate maths. Probably the bath taps would be the easiest to do.
Nope but it is pretty slow. Even filling the cistern takes an annoying long time. The pressure isn't right. Jsut trying to find a way of increasing the pressure a bit. At present can only use it for bathes and only if you are patient. Showers jsut aren't worth the effort.
Problem is most of the pipe worl isn't accessable. THe only pipe work I can get to is the pipes that run under the hall between the 2 bathrooms. Everything else is under tiled floors. Either way they are not dedicated feeds.
Problem is most of the pipe worl isn't accessable. THe only pipe work I can get to is the pipes that run under the hall between the 2 bathrooms. Everything else is under tiled floors. Either way they are not dedicated feeds.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local