the warm water in our taps take 20 second to be warm with our unvented cylinder set up. Surely this is a issue. I appreciate the cold water in pipes need to come out first, but not for 20 seconds
Water takes 20 seconds to be warm out of a tap
- Thread starter mrbg07546
- Start date
Unless you have a secondary return fitted, and dependant upon where the cylinder is located you will wait a bit for hot water.
- Joined
- 27 May 2011
- Messages
- 2,160
- Reaction score
- 1,131
- Country
Replumb in smaller bore pipe, flow rate permitting, or install a secondary loop.
Alternatively, move the cylinder closer to the offending taps. Or vice versa.
Alternatively, move the cylinder closer to the offending taps. Or vice versa.
Last edited:
H
Hot&Cold
mrbg07546 welcome back 
Could do with a bit of insulation there
H
Hot&Cold
Think insulation was the next job,
Lagging pipes
Discussion in 'Plumbing and Central Heating' started by mrbg07546, 16 Aug 2017.
Read more: https://www.diynot.com/diy/threads/lagging-pipes.487308/#ixzz4s4hU63Sy
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local