WB Heatslave 2 DHW control

[vala]

Hi all,

Got a WB heatslave 2 combo boiler and have a question with regards to the DHW controls on the boiler control panel.
When its set to a lower setting, i.e setting 2 does this mean that the DHW flow temp is lower in the store, therefore it will fire more often to replenish, then say if the temp was set high, i.e setting 6, where the DHW flow temp is higher?

 

[oilhead]

There are two thermostats, 1 for CH and 1 for heating. The PCB sorts out which to use.

 

[vala]

@oilhead
Thanks for the reply. I'm aware of the 2 separate controls.
Do you have any info with regards to my question?
Thanks