Hope someone can help as am freezing.
It's been bitter here so heating has been on low during the night for the past few nights, generally only on during day. Last night was -13 and woke about 4am and the heating was off.
The error code on the boiler is the fast flashing red light on the HW. According to the users guide this means Air Flow error.
Have tried turning it on/off, no go. Reset button does not seem to work.
When turned on the CH red light comes on, then nothing happens for about 10-15 secs, then the HW red light starts flashing rapidly.
Have called engineer but probably won't be here till tomorrow, in meanntime am freezing.
Boiler is about 10 years old and has been serviced regularly, last service 1 month ago.
There are no icicles on the vent outdoors nor on the copper pipe.
Pressure seems ok at about 1.2.
Any suggestions for an interim fix while waiting for engineer?
Thanks
It's been bitter here so heating has been on low during the night for the past few nights, generally only on during day. Last night was -13 and woke about 4am and the heating was off.
The error code on the boiler is the fast flashing red light on the HW. According to the users guide this means Air Flow error.
Have tried turning it on/off, no go. Reset button does not seem to work.
When turned on the CH red light comes on, then nothing happens for about 10-15 secs, then the HW red light starts flashing rapidly.
Have called engineer but probably won't be here till tomorrow, in meanntime am freezing.
Boiler is about 10 years old and has been serviced regularly, last service 1 month ago.
There are no icicles on the vent outdoors nor on the copper pipe.
Pressure seems ok at about 1.2.
Any suggestions for an interim fix while waiting for engineer?
Thanks
