Haha, don’t mention mosaics to me !!! That was the plan, but it was quickly turning into a disaster, and I aborted before the quick set started to go off because if it had set, it really would have been a disaster. I ended up pulling them up and cleaning the adhesive off tray. I think the mistake I made with the mosaic is that it they were 6 mm thick and my floor tiles are 10 mm. I just thought I’d easily make the difference up with a thicker bed of adhesive. However, even on the first tile I was having all sorts of problems getting the tile to sit right, I kept pulling it up to add adhesive or remove adhesive, or it wasn’t level with the floor tile…etc. But the biggest problem was that when I applied any kind of pressure to the tile, the adhesive was working it’s way into all the grout lines, and there’s no way I’d have got any grout in there. I will put it down to a big lack of experience!! Anyhow I’ve bought the tiles now, they are non slip version of my floor glazed floor tiles. And to be honest I think I will prefer the look. Not only that, I can use slow set S1 on these tiles (the mosaics said you must use rapid set) so I won’t find it as stressful. I have a large ish wet/table saw so the cuts should be easy enough, I just wanted to know if the pattern looked okay. Many thanks