Where can I buy a 15mm or 1/2" flow switch please?
- Thread starter mogget
- Start date
I have a 22mm one, brand new that can be had for what we paid for it.
Specially bought for the purpose (mis diagnosis by the underling of the time.
Would need to check the price in the office.
Specially bought for the purpose (mis diagnosis by the underling of the time.
Would need to check the price in the office.
It does... Though it's called a conversation.
I might not get back to you until tonight or Saturday. So don't panic if you don't hear back right away.
I might not get back to you until tonight or Saturday. So don't panic if you don't hear back right away.
Half of the engineers on here , including Dan above, are recovering from serious malfunctions which in most cases required spells in IC.
They now take greater care while cycling, walking down stairs, lifting boilers, and walking into doors etc.
They now take greater care while cycling, walking down stairs, lifting boilers, and walking into doors etc.
Perhaps I should not have been so terse. I'm sorry to hear you've been in the wars Dan. I'm not trying to minimise anyone else's problems Tony. I actually have been very unwell (the illness I have has a high mortality rate in the acute phase, and is likely to shorten my life substantially), and it's not a competition anyway. I'm not even complaining about it, just explaining why I've not been around for a while.
I was in intensive care for a few weeks before Christmas after tearing my kidney in half and rupturing my spleen; and have been in college al this week renewing my gas qualifications and upgrading to commercial. I am now dealing with some emergencies that came in as well as paper work dating back to November. However, the good egg in me didn't think there was any terseness in you reply.
I have two here that switch 3A at 1 litre a minute. Both are 22mm. Both are unused.
One is compression and the other is a demountable push fit type. If you PM me, you can have them for cost+postage.
I have two here that switch 3A at 1 litre a minute. Both are 22mm. Both are unused.
One is compression and the other is a demountable push fit type. If you PM me, you can have them for cost+postage.
Cheers - will have a look in a short while.
Good grief Dan, I hope you are feeling better now! 
Mogget, hope you are too, nice to see you back. 
Mogget, hope you are too, nice to see you back.
Ah the joys of the forum software - totally missed Mogget's post before mine.
Hope things are not as bad as they seem!
Hope things are not as bad as they seem!
Just have to see how it goes, it's not cancer fortunately but I had a bout of severe acute pancreatitis in January (the worst of my 7 bouts) which left me unable to absorb nutrients and vitamins from my food. The only thing I could digest was sugar, but by the time the pancreatic failure was identified in October I was very weak indeed. Fortunately things are improving now, slowly getting my strength back, and trying not to think about old age too much.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
