Where to buy smooth finishing render mix

[RrogerD]

I'm looking for a bag of pre-mix external finishing render (smooth). Any ideas where I can buy it from any of the usual building suppliers? I've looked online at the usual suspects; Wickes, Travis Perkins, B&Q, Selco etc but cannot seem to find the right thing. They appear to have base coat but not finishing (smooth) coat.
I have a 1980s mock-tutor (white render, black boards) property. I'm removing the horizontal boards but what remains is quite rough, needs smoothing before painting.

 

[Wayners]

Couples off boxes of toupret masonry powder will do It

 

[RrogerD]

Couples off boxes of toupret masonry powder will do It

Presumably, scour the surface and a tacky coat of sbr first?

 

[Wayners]

Will stick fine as is.
About 12 mind in it's used for cracks so you can have a look at it being used.
Just for filling it would work well as you aren't skimming over everything

 

[Ivor Windybottom]

Ready-mixed cement-based products do not exist, because they can't - cement starts setting the moment water is added, it will even set under water. It doesn't need to dry to set, in fact drying while setting weakens it. So anything pre-mixed would be a brick.

Any pre-mixed cement lookalike products are not cement. They'll be a chalky or plastic-based goo with bits of sand and some grey colour in.

 

[opps]

Ready-mixed cement-based products do not exist, because they can't - cement starts setting the moment water is added, it will even set under water. It doesn't need to dry to set, in fact drying while setting weakens it. So anything pre-mixed would be a brick.

Any pre-mixed cement lookalike products are not cement. They'll be a chalky or plastic-based goo with bits of sand and some grey colour in.

Isn't JetCem cement?

 

[RrogerD]

Ready-mixed cement-based products do not exist, because they can't - cement starts setting the moment water is added, it will even set under water. It doesn't need to dry to set, in fact drying while setting weakens it. So anything pre-mixed would be a brick.

Any pre-mixed cement lookalike products are not cement. They'll be a chalky or plastic-based goo with bits of sand and some grey colour in.

I wasn't after a wet solution, just the correct ratio mix, dry.
I've bought and used the Toupret stuff now. It seems to be working ok (work in progress).

 

[Wayners]

Damp sponge edges to bend in.
You can mix up some and roll over if you want to rough up surface a little.
Get artistic and creative.

 

[Ivor Windybottom]

What's beneath it? Concrete block? I'm guessing if it's modern then it's not actually panels and the timber isn't actually structural, more likely just nailed on planks.

You may be wasting your time, it's moved before so will move again and crack your patches. You'll probably see the joins and over-skim marks once it's painted.

Probably best to re-do it all, with a modern product in embedded mesh. While you're at it you could consider losing the mock tudor look if you fancy a less fussy finish with less maintenance.

Or just finish one panel, all done your way and painted, see how it looks after a winter.