which door lining

[eviliangenius]

morning all.
currently putting up a stud wall and i now need to buy and fit the door lining.which do i need?
106 width
108
115
131

the partition is 100w and will have 12.5mil plaster board either side.
thanks alot
ian

 

[eviliangenius]

and the door will be 35mm wide

 

[noseall]

108mm or 4,1/4"

 

[awbcm]

If your studs are 100 x 50 then with a single layer of 12.5mm plasterboard plus 2 -3mm plaster skim on each side then the total thickness of your wall will be 130mm so the door lining will need to be, yes that’s correct a minimum of 130mm

But if your wall as an overall thickness of 100mm i.e. made up of 75mm studs again with a single layer of 12.5mm plasterboard plus 2 -3mm plaster skim on each side. Then you are looking for a door lining of a minimum of 106mm.

The following may be of interest.

Door lingings

Stud partition

Door lining refurbishment

 

[noseall]

ignore my post, i have specced for a 75mm stud partition, sorry.

as above.

5,1/4 or 131mm. doh