Which make unvented cylinder

[b21playa]

Hi all

Each plumber has recommended different ones from Gledhill, Megaflow, UvGold, unistor etc, but which is the decent along with a 24kw boiler

Thanks

 

[muggles]

OSO Super Coil, connected to an Intergas Compact HRE 24SB if you're replacing your boiler at the same time

 

[Dan Robinson]

Wouldn't suggest any of those.


Oso are good cylinders.

Gledhill.... Cheap and nasty. Megaflow.... Over priced and nasty as is the unistor. Haven't heard of the other brand to be fair.

 

[b21playa]

Wouldn't suggest any of those.


Oso are good cylinders.

Gledhill.... Cheap and nasty. Megaflow.... Over priced and nasty as is the unistor. Haven't heard of the other brand to be fair.

This is the other : http://www.mrcentralheating.co.uk/pre-plumbed-300-litre-indirect-s-s-unvented-cylinder#.VSZXYPnF-Ck

 

[Dan Robinson]

Can't speak for the quality as I've never seen one.

The zone valve on the pre plumbed bit are pants.

 

[b21playa]

Can't speak for the quality as I've never seen one.

The zone valve on the pre plumbed bit are pants.

So best to stick with OSO?

Don't need a pre-plumbed (as shown) as installer will be piping the whole house, and zoning the heating side with 3 circuits.

Any one recommended was Telford, but not sure of this either