My Megaflo Heatrae Sadia only controls the hot water in my flat. The old timer a Grasslin QE 7+ has stopped working so decided to replace with a Drayton Lp711. The problem I am having is where to allocate the live and neutrals?? The LP711 has the following set up
N- neutral wire in
L - Live wire in
1 COM
2 OFF
3 ON
4 I believe this is spare?
After placing the Live (L) and Neutral (N) in I have two lives and two neutrals remaining and I'm not sure where they need to go, i.e 1/2/3?
I have also put a link connection between L and 1 as per the instructions.
many thanks
N- neutral wire in
L - Live wire in
1 COM
2 OFF
3 ON
4 I believe this is spare?
After placing the Live (L) and Neutral (N) in I have two lives and two neutrals remaining and I'm not sure where they need to go, i.e 1/2/3?
I have also put a link connection between L and 1 as per the instructions.
many thanks